What is the energy saving lamp installation method?

Answer: 1. Ventilation should be outstanding. The operation of the energy-saving lamp will be affected by the lamp's room temperature. If the temperature is too high, the luminosity will be reduced, which will also make it difficult to trigger the igniting process. Because of the lamp holder, avoid the device in the sealed place, lighting, lamp shade should be outstanding ventilation, to avoid the temperature due to heat can not be issued and continue to rise, affecting the good embodiment of energy saving.

2. Do not exceed the load of the lamp holder. Energy-saving lamps (especially old energy-saving lamps and lanterns inductive type) are larger and heavier than ordinary tungsten lamp bulbs. Therefore, when working with energy-saving lamps, you must be careful to cooperate with the dimensions of the lampshades or lighting fixtures. It is also necessary to pay attention to the lampholders, especially the multi-bulb type lighting, to support the weight of the bulb. If it is found that the lampholder has a loose appearance, it should be replaced or repaired immediately.

3, due to the operating principle is not the same, can not be directly used for incandescent light energy-saving lamps dimming system (such as dimming lamps, etc.). In addition, it is important to note that when installing energy-saving lamps, do not hold the lamp to avoid damage.

Guangzhou Gaaye Electronics Co., Ltd

www.gaaye.com