The car repair teaches you to replace the lights

Tail lamp replacement

1.Open the trunk lid, block the power supply of the vehicle, clean the lamp compartment and leave room for replacement.

2.Remove the dust plate on the back of the lamp. Most of the lights are divided into two types: the light bulb is integrated with the lamp holder and the light bulb and the lamp holder are separated. Here, the former is introduced, and the latter is replaced by the following head lamp.

3.Determine the need to replace the lights, hold down the rotating handle at the back of the lights and unscrew them. Replace the new lights, pay attention to the type and color of the lights.

4.Install complex lights and dust panels. In general, the assembly and disassembly work of the taillights is relatively simple, with a large work space and relatively simple structures.

Replacement of headlights

1.Open the engine compartment cover and investigate the planning of the car parts on the back of the headlights. If there is insufficient space, it is still to be replaced by a professional “4S” shop. Determine the headlight type of your car and pay attention to the type of headlights on the lower side of the headlights.

2.Unscrew the lamp cover and note that there are nuances in the method of removing the lamp cover due to different models.

3.Pull out the lamp holder with the power cord. When pulling out, pay attention to holding the lamp by hand to avoid damage.

4.Loosen the lamp holder retainer to remove the lamp, and then attach the new lamp from the beginning. The process of reinstatement is a reversal of demolition and will not be repeated here. Pay attention to the fact that when installing the dust cap from the head, it must be tightened to prevent the headlights from being exposed to rain and dust.

Guangzhou Gaaye Electronics Co., Ltd

www.gaaye.com