The use of home lighting lamp holder should also pay attention

Safety precautions for using lamp holders

(1) When connecting the screw base, connect the phase wire to the center of the base of the screw base so as to avoid electric shock when changing the lamp.

Before wiring, check whether the center tongue of the screw base is in the center, whether it is loose, whether the tongue screw is tightened or not.

(2) Lampholders If you use the lamp holder with its own switch or use an independent wall switch to control, the ground wire is connected to the lamp holder, and the fire wire must be connected to the switch.

(3) Lampholders used in oil and gas rich and humid environments (such as bathrooms, kitchens, and family outdoor streetlights) should be waterproof or rainproof. When the lamp holder is used for a long period of time, it may be caused by the failure of the top contact spring of the socket lamp holder or the center contact of the screw holder, and it is necessary to replace the new product in time.

(4) The luminaires attached to the pendant lamp holder must not be excessively heavy. For example, the 8-watt daylight chandelier cannot be mounted directly on the pendant socket lamp holder by means of the lamp wire. Two hanging wires should be installed to support the luminaire. Usually, the wire can be tied in the lamp holder to avoid stress on the single wire....

Guangzhou Gaaye Electronics Co., Ltd

www.gaaye.com