Four-point resolution aluminum buckle

We eliminated the traditional ceiling selection of integrated ceiling because it enjoys its appearance, function optimization and practical safety, but even if the integrated ceiling is not properly selected, it will also cause problems for our lives, so do integrated ceiling Before this one, make a good preparation for knowledge.

Panel

The panel is the ceiling module component, which occupies the largest area in the entire integrated ceiling. Therefore, whether it is good or not has an irreplaceable effect on the appearance of the entire integrated ceiling. The first thing to look for is the thickness of the panel, and then the leveling. Degree, surface finish, tightness when combined, etc.

Hosts

The mainframe is the heart of the integrated ceiling. Its main functional areas are controlled by the host. Its advantages and disadvantages will directly affect the lighting of your life, including the kitchen and bathroom, eliminate the smell of the bathroom, your bathing, etc. select. To see if it passed the 3C certification, you should try it out first and listen to the sound.

Combination

When you buy an integrated ceiling, how to combine is also a key issue. Although you can freely choose to collaborate with it, if you do not have a professional to design a layout for you, then you will find it difficult to achieve the ideal state you want. Therefore, when you purchase an integrated crane, you must give the floor plan to the merchant who will help you design the layout.

Aluminum ceiling plate for ceiling of integrated ceiling

The integrated ceiling panels currently sold in the market (note: the aluminum-magnesium pincers used in the ceiling) range in price from top to bottom. People with clear eyes know that they are tricky. For this purpose, a survey was specifically conducted in the market. Here, several methods for distinguishing the quality of ceiling tiles are introduced:

First, compare the material of aluminum magnesium plate

With the visual inspection of the thickness of the plates, the ceilings for home decoration are all about 0.7mm or so, and the engineering is 0.8mm. This is the international standard. Too thick aluminum-magnesium plates must have been joined with other cheap iron impurities. Some people may ask, aluminum magnesium plate, certainly inside addition to aluminum, there will be magnesium this iron particles. The addition of magnesium to the integrated ceiling-aluminum plate will make the plate tougher. However, the cost of magnesium is much higher than that of the aluminum itself. JS certainly will not add more magnesium in order to thicken the plate, only by adding iron. Low-priced iron to make money, this will inevitably affect the flexibility of the plate; If less than 0.6mm, it will cause the plate hardness is not enough, too thin aluminum plate, if a piece of paper, can not bear. In this way, it will be a very difficult project when it is used for future demolition work. If it is not careful, the plate will be deformed during the removal process and lose its function. Really good plate, you can make a small test, holding a corner of the plate, and then a little hard to shake around a few times to see if the plate is deformed, no, certainly can reach future home use.

Second, compare the plate primer

The role of the primer to protect the aluminum magnesium plate will not be caused by the water vapor generated in the kitchen or bathroom during the normal life from the buckle connection to the bottom of the buckle, so that the underside of the ceiling buckle is in contact with water and air for a long time. Once the time is up, the aluminum buckle plate will meet. Rusty mildew from the bottom until it loses its effect. The primer of the high-quality aluminum buckle plate of the integrated ceiling should be evenly sprayed on the bottom of the plate. How to make it uniform, so that when the bottom of the plate is carefully observed with the eye, there will be no non-silvery gray dots (the aluminum magnesium plate itself is aluminum itself Silver grey prevails.

Third, compare the film of the sheet surface overwhelming

At present, except for imported films, they are generally superior to domestic films in quality. The biggest difference is that there are two aspects, the domestic film will be affected by the light source (usually about six months or so) the situation, resulting in loss of light skin irradiation of the situation of the skin; imported film completely eliminate the occurrence of such phenomena! Integrated ceiling - Another difference is that after the imported film is attached to the surface of the board, there will be no lifting or falling off. Even if the tool is used to tear, it will not separate from the surface of the board. Domestic film can not guarantee this.

Fourth, fixed keel

In addition to the traditional keel fixed plate, there is a role in the above nailed eye for bearing lighting lamp holder and Yuba, after fixing the lamp holder and Yuba, can not move the lamp holder and Yuba. Integrated ceiling - and truly meet the international safety standards is no need to nail fixed keel, then rely on what to fix the lamp holder and bathroom heater it · by adsorption on the keel activity (retraction spring) card position to relatively fixed, Relatively speaking, it means that you can also move the lights and the Yuba around according to the actual situation, which is flexible and convenient, safe and reliable. Of course, as a new process, we cannot completely deny the traditional keel. However, the emergence of new technology will inevitably cause the replacement of old products, and ultimately benefit, or consumers!

Guangzhou Gaaye Electronics Co., Ltd

www.gaaye.com